Preparation Before Use - Sinclair SP-300A User Manual

Preparation before use

Host computer preparation
Remove the packaging bags before use and
then connect to the power to start the machine.
(Please refer to the picture in operation.)
1.
Open and remove the panel
2.
Remove the dust collection frame
3.
Remove HIMOP grid
4.
Remove the cotton filter and HIMOP
+ HEPA filter component
5.
After tearing off the plastic packaging of the
cotton filter and HIMOP + HEPA filter
components, put them into the HIMOP grid.
6.
Install the machine according to reverse order.
P r e p a r e r e m o t e c o n t r o l
1.
Prepare remote control
Open the battery cover on the back of the remote
control, place the battery in the circular tank, pay
attention to positive and negative poles, plug
back the remote control and then it can be used.
2.
Use the remote control
• Please put the remote control pointing to the receiver
window in operation.
• The remote control should be used in the effective
range.
• Make sure there is no obstruction between the remote
control and air cleaner, otherwise it will affect the
signal transduction.
Press
Battery