Planet EPL-2000 User Manual page 16

mode to "1000 Force" if needed.

Removing the transceiver module
1. Make sure there is no network activity by consulting or checking with the network administrator. Or through the
management interface of the switch/converter (if available), disable the port in advance.
2. Remove the Fiber Optic Cable gently.
3. Turn the handle of the MGB module to a horizontal position.
4. Pull out the module gently through the handle.
Never pull out the module without pulling the handle or the push bolts on the module.
Directly pulling out the module with force could damage the module and SFP module slot of
the GEPON OLT.
Figure 2-8 Pulling Out the SFP Transceiver
16
User's Manual of EPL-2000