AT&T 1782 User Manual page 25

SET UP SYSTEM FEATURES
Blocked Call Information
NOTE: This feature may be called by different names by different local telephone
companies and may not be available in all areas.
You can set up the system so that when a call is received from a caller with a blocked or
private telephone number, the system will play a pre-recorded announcement ("We're
sorry, blocked calls to this number cannot be accepted"), then hang up.
1 Press o.
2 Press C.
3 Use the softkey to select CALL ID.
4 Select OK until the screen displays Blocked Calls.
5 Select CHANGE to display Accept or Do Not Accept.
6 Select OK.
Set Display Screen Language
1 Press o.
2 Press C.
3 Use the softkey to select CALL ID (or ID LLAM).
4 Select OK or SI until the screen displays Language/Idioma (or
Idioma/Language). The current language selection appears in
the center of the screen.
5 Use the softkey under CHANGE or CAMBIAR to change the selection.
6 Select OK (or SI).
22