AT&T 1782 User Manual page 18

Select Outgoing Announcement for a Line
1 Press o.
2 Use the softkey to select ANS SYS. The screen displays Set options for which
mailbox?
3 Select L1 or L2. The screen displays your choice.
4 Press C or c to select Announcement A, B, C or AO.
5 Select OK.
Ring Select and Toll Saver for a Line
You can select how many times the line will ring before the system answers a call. (Ring
Select is preset to 4 rings for both lines.) Set for 2 to 7 rings, or choose from two Toll Saver
settings. If you select Toll Saver 4–2, the system answers after four rings when you have
no new messages, and after two rings when you have new messages. If you select Toll
Saver 6–4, the system answers after six rings when you have no new messages, and after
four rings when you have new messages. You can set Ring Select differently for each line.
1 Press o.
2 Use the softkey to select ANS SYS. The screen displays Set options for which
mailbox?
3 Select L1 or L2. The screen displays your choice.
4 Select OK until the screen displays Rings and the current setting.
5 Select CHANGE or press C or c until the screen displays your
desired Ring Select setting.
6 Select OK.
SET UP SYSTEM FEATURES
15