Insignia NS-CSPBTCUBE-W Quick Setup Manual

Top view
Quick Setup Guide
NS‐CSPBTCUBE‐W
Bluetooth Cube Speaker
with Speakerphone
PACKAGE CONTENTS
• Bluetooth speaker
• Keychain strap
Back view
• Quick Setup Guide
FEATURES
• Bluetooth streams music wirelessly
• Rechargeable battery lasts for up to two hours
• Use as a speakerphone for hands-free talking
• Take pictures remotely using the Power/pairing button
Before using your new product, please read these instructions to prevent any damage.
CHARGING YOUR SPEAKER
Charge indicator
1 Connect the small end of a charging cable (not included) to
the micro USB port underneath the cover on your speaker.
Bluetooth indicator
2 Connect the other end to a USB charging port.
Note: When the battery is low, you will hear beeps. About 10 minutes later,
the speaker will power off automatically.
Power/pairing button
Microphone
Micro USB
charging port
Keychain strap
CHARGE INDICATOR LED DESCRIPTION
hole
Solid red Charging
Off Fully charged
TURNING YOUR SPEAKER ON AND OFF 5 To disconnect from the paired Bluetooth device, press and
hold the Power/pairing button on your speaker for one
Press and hold the Power/pairing button for three seconds to
second. Your speaker disconnects from the Bluetooth
turn your speaker on or off. The Bluetooth indicator blinks
device and enters pairing mode again.
quickly and the speaker enters pairing mode.
BLUETOOTH INDICATOR LED
CONNECTING WITH BLUETOOTH
1 Make sure that your Bluetooth device is turned on and
Blinks blue rapidly
within 33 feet (10 meters) of your speaker.
Solid blue
2 On your speaker, press and hold the Power/pairing button
for one second (or until hear a tone). Your speaker enters
pairing mode and the Bluetooth LED blinks.
Note: Press and hold the Power/pairing button for one second to
return to pairing mode.
3 Turn on your Bluetooth device and turn on Bluetooth.
Set your device to pairing mode, then select
NS-CSPBTCUBE. See the instructions that came with your
Bluetooth device for information about pairing.
4 If you are asked for a password, enter 0000. When pairing
is complete, the Bluetooth indicator on your speaker lights
solid blue.
RECONNECTING TO A PAIRED DEVICE
When your speaker is not paired to a device, the Bluetooth
indicator blinks blue.
Your speaker loses the Bluetooth
connection if you... To reconnect...
DESCRIPTION
Turn off your speaker. Turn on your speaker. Your speaker searches for the last
Speaker is in pairing mode connected Bluetooth device and reconnects.
Move the Bluetooth device out of Make sure that your Bluetooth device is within 33 feet of
Speaker is paired
range. your speaker.
Turn off your Bluetooth device. Turn on your Bluetooth device, then make sure that
Bluetooth is on.
Turn off Bluetooth on your Bluetooth Turn on Bluetooth on your Bluetooth device.
device.
Connect your Bluetooth device to Disconnect your Bluetooth device from the other
another Bluetooth device. Bluetooth device, then set your device to pairing mode.
Select NS-CSPBTCUBE on your Bluetooth device.
Note: If a device does not automatically reconnect, you may need to
reselect NS-CSPBTCUBE on your Bluetooth device.
LISTENING TO MUSIC
1 Press and hold the Power/pairing button, then connect to
your Bluetooth device.
2 Begin playback on your Bluetooth device.
3 Adjust the volume on your Bluetooth device.
Note: Use the controls on your Bluetooth device to control playback.
TAKING A CALL
1 Press the Power/pairing button briefly to accept an
incoming call.
OR
Press and hold the Power/pairing button to reject an
incoming call.
2 Press the Power/pairing button during a call to end the call.
TAKING PICTURES
1 Connect your smartphone to the speaker using Bluetooth.
2 Start your phone's camera.
3 Quickly press the Power/pairing button on your speaker to
take pictures.