Settings In The Program Menu; How To Access The Menu Items In The Program Menu; Setting The Date And Time - Uhr Menu Item - Gira 0389 Series Operating Instructions Manual

Settings in the program menu

You can change the following settings in the so-called program menu:
• Date and time (Uhr menu item)
• Temperature steps (tEmP menu item)
• Time program (ProG menu item)
• Holiday function (UrLb menu item)
• Anti-freeze function (FrSt menu item)

How to access the menu items in the program menu

Irrespective of the setting you want to change you always access the
desired menu item in the program menu as follows:
1. In normal display press the P button at least 5 seconds in order to
access the program menu.
2. Press the + or - button in order to access
the desired menu item. The adjacent
example shows the first menu item, the
time.
3. Press the S button in order to select
the desired menu item.
Setting the date and time – Uhr menu item
You can modify the date and time at any time.
i
Note!
The clock is designed as a week-based time switch which functions for
at least four hours if the power fails.
The changeover between the summer and winter time is carried out
automatically.
The installed calendar automatically takes the leap years into
consideration.
1. Go in the program menu to the Uhr menu item (see above).
✓ The hour display flashes.
2. Press the + or - button until the desired
hour has been set.
i
Time format
You can have the time displayed in international 24 hour format
(0H...23H) or in the English-speaking a.m. (12AM...11AM) and p.m.
format (12PM...11PM). When you set the clock, the display begins with
the 24-hour format, followed by the AM/PM format. Depending on the
hour format which you confirm with S, the time is displayed in future
in 24-hour format or in AM/PM format.
3. Press the S button.
✓ The hour is set and the minute display
flashes.
4. Use the same method to carry
out the further settings. These are:
• Minutes – the time is set after confirmation with the S button
• Calendar year
• Month
• Day – only enter the date here. The weekday does not have to be
entered since it is calculated automatically from the entered date.
i
Date does not have to be set!
If the date is already set (correctly), you can already exit the setting here
by pressing the P button.
5. Confirm each entry with the S button.
After the last confirmation with S, the system returns automatically
to the program menu.
6. Press the P button in order to return to the normal view.
7