Setting The Individual Temperature; Deactivating The Individual Temperature; Locking Buttons - Gira 0389 Series Operating Instructions Manual

Setting the individual temperature

You can set an individual temperature if the currently set temperature of
the time program does not appear to be suitable.
1. Press the S button.
✓ The currently set individual temperature is
displayed flashing.
2. Press the + or - button in order to set the
individual temperature.
3. Press the S button in order to confirm the set individual
temperature.
✓ The room temperature controller returns
to the normal display and regulates the set
individual temperature until the next
switching time in the time program. As
long as the individual temperature is used
as the setpoint input, no operating mode
(Comfort, Lowering, Anti-freeze) is displayed, since none of the
temperatures stored there is valid.

Deactivating the individual temperature

You can deactivate the individual temperature at any time:
1. Press the P button in order to deactivate the individual
temperature.
✓ The room temperature controller returns to the normal time program.
6

Locking buttons

To prevent accidental or unauthorised operation of the room temperature
controller, you can activate the button locking function in the normal
view.
Activating button locking function
1. Press the S and - buttons for longer
than 5 seconds.
✓ When the button locking function is active,
"-- --" appears in the display each time a
button is pressed to signal that the desired
operation has been denied.
Deactivating button locking function
1. Press the S and - buttons for longer than 5 seconds.
✓ During unlocking "-- --" appears in the display for 5 seconds. When the
button locking function is deactivated, the normal display appears
again and the buttons can be released.