NEC P452H User Manual page 69

4. Using On-Screen Menu
Using Test Pattern [TEST PATTERN]
Displays the test pattern for adjusting distortion on the screen and the focus at the time of the projector setup. Once
the [TEST PATTERN] on the onscreen menu is selected, the pattern for adjustment will be displayed on. If you find
distortion on the pattern, adjust the projector installation angle or correct distortion by pressing the KEYSTONE button
on the remote. If the focus adjustment is required, control the focus lever. Press EXIT button to close the test pattern
and return to the menu.
NOTE:
• Recommend to perfrom the focus adjustment after leaving the projector under the state the TEST PATTERN has been projected
for over 30 minutes.
Setting the network [NETWORK SETTINGS]
This function display the network settings menu. (→ page 90)
58