Connecting An External Monitor - NEC P452H User Manual

Connecting an External Monitor

You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer
analog image you're projecting.
Computer cable (VGA) (supplied)
NOTE:
• The AUDIO OUT mini jack does not support Headphone terminal.
• When audio equipment is connected, the projector speaker is disabled.
• The signal output from the MONITOR OUT (COMP.) of this projector is for projecting image on exclusive one display.
• When no signal is applied over 3 minutes in the condition of projector standby when NETWORK STANDBY is set in the Standby
mode, output from the MONITOR OUT (COMP.) or AUDIO OUT terminal will be stopped. In this case pull out the computer cable
and set it back after inputting video signal
Monitor out and sleep mode:
• The MONITOR OUT (COMP.) terminal will not work when [NORMAL] is selected for [STANDBY MODE].
The MONITOR OUT (COMP.) terminal will work only in the sleep mode.
Applying a signal from the COMPUTER IN terminal will put the projector in the sleep mode, which allows you to use the MONITOR
OUT (COMP.) terminal and the AUDIO OUT mini jack.
The sleep mode is one of the standby modes. The sleep mode cannot be selected from the menu.
• In the network standby mode, sound for the last viewed computer or video source will be heard.
BNC-to- COMPUTER IN terminal converted signal will not be output in the standby mode and sleep mode.
AUDIO OUT
Stereo mini-plug audio cable (not supplied)
5. Installation and Connections
MONITOR OUT (COMP.)
Computer cable (VGA) (not supplied)
77