❸ Turning On The Projector - NEC P452H User Manual

❸ Turning on the Projector
1. Remove the lens cap.
With the lens cap's stopper pressed up, pull forward and
off.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator lights blue and the image is projected
on the screen.
TIP:
• When the message "PROJECTOR IS LOCKED! ENTER YOUR
PASSWORD." is displayed, it means that the [SECURITY]
feature is turned on. (→ page 31)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
2. Projecting an Image (Basic Operation)
Standby
Steady red light
(→ page 125)
12
Stopper
Blinking
Blinking blue
light
Power On
Steady blue
light