Detail Settings - NEC P452H User Manual

[DETAIL SETTINGS]

Storing Your Customized Settings [REFERENCE]
This function allows you to store your customized settings in [PRESET 1] to [PRESET 8].
First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE].
HIGH-BRIGHT �������� Recommended for use in a brightly lit room�
PRESENTATION ����� Recommended for making a presentation using a PowerPoint file�
VIDEO �������������������� Recommended for typical TV program viewing�
MOVIE ������������������� Recommended for movies�
GRAPHIC ��������������� Recommended for graphics�
sRGB ��������������������� Standard color values�
NATURAL ��������������� Well-balanced setting of brightness and color
DICOM SIM� ���������� Recommended for DICOM simulation format�
Selecting Gamma Correction Mode [GAMMA CORRECTION]
Each mode is recommended for:
DYNAMIC �������������� Creates a high-contrast picture�
NATURAL ��������������� Natural reproduction of the picture�
BLACK DETAIL ������� Emphasizes detail in dark areas of the picture�
NOTE: This function is not available when [DICOM SIM.] is selected for [DETAIL SETTINGS].
Selecting Screen Size for DICOM SIM [SCREEN SIZE]
This function will perform gamma correction appropriate for the screen size.
LARGE ������������������� For screen size of 110"
MEDIUM ���������������� For screen size of 90"
SMALL ������������������� For screen size of 70"
NOTE: This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS].
Adjusting Color Temperature [COLOR TEMPERATURE]
This option allows you to select the color temperature of your choice.
NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.
Enhancing the Color [COLOR ENHANCEMENT]
This allows you to adjust the color density of the image.
The color of the image will become deeper in the order of "LOW", "MEDIUM", AND "HIGH" as the displayed image
will become darker.
With "OFF" selected, the COLOR ENHANCEMENT function will not work.
NOTE: This function is available only when [PRESENTATION] is selected [REFERENCE].
Adjusting Brightness and Contrast [DYNAMIC CONTRAST]
This function allows you to adjust the contrast ratio optically.
To increase the contrast ratio, select [ON].
NOTE:
• The [DYNMIC CONTRAST] item cannot be selected in the following cases:
- When [CONSTANT BRIGHTNESS] is functioned under the state [ECO MODE] has been set to [NORMAL] or [ECO] for [ECO
SETTINGS].
- When [ON] is selected for [3D] while images are projected.
• The ECO MODE and DYNAMIC CONTRAST features control the lamp power. Some pictures may become extremely bright when
using both ECO MODE and DYNAMIC CONTRAST features to control the lamp power. To avoid this phenomena, turn off the ECO
MODE and DYNAMIC CONTRAST.
44
4. Using On-Screen Menu