❻ Menu Descriptions & Functions [Info.]; [Usage Time] - NEC P452H User Manual

❻ Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage.This item has nine pages.The information included is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.

[USAGE TIME]

[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
[TOTAL COST SAVINGS]($)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE
REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on.
• The message to the effect that the lamp should be replaced will be displayed for one minute when the projector is
turned on and when the POWER button on the projector or the STANDBY button on the remote control is pressed.
To dismiss this message, press any button on the projector or the remote control.
OFF AUTO ECO
3000H 3000H to
5000H
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving cal-
culation is based on the OECD (2008 Edition). (→ page 29)
Lamp life (H)
NORMAL
4000H
ECO OFF
5000H 100%
66
4. Using On-Screen Menu
Brightness by mode
AUTO ECO NORMAL
OFF thru ECO Approx. 80%
ECO
Approx. 60%