Handset - Marmitek DP150 User Manual

HANDSET

1. The supplied Li polymer battery pack is already installed in the
handset. (To replace, press down the lock button
the battery door, take out the battery pack and disconnect from the
socket .)
2. With the handset remaining switched off, place it onto the charger
stand.
3. Plug in the supplied AC power supply into an AC outlet and connect
its output plug to the DC jack
stand.
4. The charging indicator
process. Adjust the position of the handset in the charger stand in
case this indicator does not light up. During charging, the battery
level icon
will flash in turn.
5. The battery pack should be fully charged within 4 hours when used
for the first time. The icon
if the unit is switched on.
DoorPhone 150
TO AC OUTLET
should light up red during the charging
will show up in LCD and the segments inside the icon
will disappear or remain visible in LCD
located at the back of the charger
and slide open
7