Manual Exposure Flash
In some occasions, or for special expression, you may need your own flash
exposure instead of the automatic controlled exposure. You can set i40 for
non-automatic flash mode, and select the desired flash power from 9
different levels
Set i40 to the camera's hotshoe and press the on/ off switch to power on.
Indicator Lamp A on.
Rotate the Function dial to "M" mode.
Indicator Lamp B on.
You can select the power by rotating the Power dial :
1/256 ﹣1/128 – 1/64 – 1/32 – 1/16 – 1/8 – 1/4 – 1/2 –
1/1 (Full) power.
12