Nissin i40 Instruction Manual page 10

Shooting i40 automatically
The modes to be set on the camera:
(Full Auto),
A
(Aperture priority),
Portrait,
Sunset,
In all of the camera's shooting modes listed above, i40 will fully work in ADI/
P-TTL automatic flash control system.
Set i40 to the camera's hotshoe and press the on/ off switch to power on.
Indicator Lamp A on.
Rotate the Function dial to "A" mode.
i40 is now set for the camera's automatic flash control system.
Press the shutter button of your camera halfway to focus the subject.
Shutter speed, aperture and flash mark (
Take the picture. i40 is fired and the result is immediately shown on the camera's
LCD display.
When you change the focal length, the power zoom flash head of i40 immediately
sets its position to match the lens focal length you selected.
The flash illumination coverage of i40 responds to the lens focal length of
24mm - 105mm.
(Program),
(Manual),
Landscape,
Night view
(Shutter priority),
S
Close-up,
) are indicated in camera's view finder.
Moving-subject,
9