Rigging The Gennaker - RS Feva Owner's Manual

To complete this section, you will need:
• 1 x RS Feva
• 1 x
gennaker halyard block
• 1 x
gennaker sheet
Your RS Feva will arrive with the
There is no need to unthread the
rigging the gennaker. Should the
refer to Appendix 9.3 RS Feva Gennaker Pole System to re-rig.
Before stepping the mast, you will need to
1) Shackle the gennaker halyard block
of the top mast (see picture 4.29).
2) Uncoil the gennaker halyard
3) Take the end of the
thread it through the
4) Secure the end of the

4.10 Rigging the Gennaker

gennaker
and shackle
gennaker halyard
halyard
halyard
to the uppermost metal ring on the front face
(that is emerging through a hole in the foredeck).
gennaker halyard
gennaker halyard
gennaker halyard
HINT
and bowsprit
from under the foredeck
be accidentally pulled through, please
:
and, with the mast
block.
at the base of the mast.
already rigged.
when you are
lying beside the boat,