Micros Systems PCWS 2015 Setup Manual page 119

5. Be sure to install the screw that secures the LCD/Touchscreen Assembly to
the base.
Figure 3-46: Securing the LCD/Touchscreen Assembly to the Base
6. Examine the top cover gasket to ensure it is seated in the groove. Install the
top cover by first attaching to the hooks at the rear of the base then rotate
downward to snap the cover in place.
7. Tighten the captive screws to secure the cover.
PCWS 2015 Setup Guide - 2nd Edition
Figure 3-47: Installing the Top Cover
What's Inside?
Reassembling the PCWS 2015
3-51