Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Dahua HAC-HDWXXXXCP/N-IR2
Summary of Contents for Dahua HAC-HDWXXXXCP/N-IR2
- Page 1 HDCVI ICR IR Water proof Dome Camera User’s Manual Version 1.0.0...
-
Page 2: Table Of Contents
Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Applicable Models ......................1 Device Framework ........................2 Installation............................ 6 Installation for IR Water proof Dome ................. 6 Installation for IR Vari-focal Dome ................8 Menu ............................11 HDCVI Series DVR Settings .................. -
Page 3: Important Safeguards And Warnings
Welcome Thank you for purchasing our HDCVI camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. - Page 4 Please do not dismantle the device; there is no component which can be fixed by users themselves in the machine. It may cause water leakage or bad image for the device due to unprofessional dismantling. It is recommended to use the device with thunder proof device in order to improve thunder proof effect. The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera.
-
Page 5: General Introduction
Can be applied to road, warehouse, underground parking lot, bar, pipeline and other places with darker light or no light. 1.3 Applicable Models The manual can be applied to the following models: HAC-HDWXXXXCP/N-IR2, HAC-HDWXXXXDP/N, HAC-HDWXXXXEP/N, HAC- HDWXXXXRP/N-Z and HAC-HDWXXXXRP/N Note: “XXXX” is the four numbers in the model, such as 2100. -
Page 6: Device Framework
2 Device Framework HAC-HDWXXXXDP/N HAC-HDWXXXXDP/N. See Figure 2-1 for the dimension of Figure 2-1 See Figure 2-2 for the structure components of HAC-HDWXXXXDP/N. Figure 2-2... -
Page 7: Figure
HAC-HDWXXXXCP/N-IR2 See Figure 2-3 for the dimension of HAC-HDWXXXXCP/N-IR2 Figure 2-3 See Figure 2-4 for the structure components of HAC-HDWXXXXCP/N-IR2. Figure 2-4 HAC-HDWXXXXEP/N See Figure 2-5 for the dimension of HAC-HDWXXXXEP/N. Figure 2-5... - Page 8 See Figure 2-6 for the structure components of HAC-HDWXXXXEP/N. Figure 2-6 HAC-HDWXXXXRP/N See Figure 2-7 for the dimension of HAC-HDWXXXXRP/N. Figure 2-7 See Figure 2-8 for the structure components of HAC-HDWXXXXRP/N. Figure 2-8...
- Page 9 HAC-HDWXXXXRP/N-Z See Figure 2-9 for the dimension of HAC-HDWXXXXRP/N-Z. Figure 2-9 See Figure 2-10 for the structure components of HAC-HDWXXXXRP/N-Z. Figure 2-10 Note: When it is short circuit HD/SD switch control cable (if yes), it will realize the switch from ...
-
Page 10: Installation
3 Installation Dome camera mainly uses ceiling installation; installation surface includes ceiling and wall. Attention: Before the installation, please make sure the installation surface is thick enough to sustain at least 3X weight of the camera. For the installation mode of side outlet, make sure the direction of side outlet is in accordance with that of the installation position map when sticking the installation position map. - Page 11 Figure 3-1 Step 3 Put the dome body vertically into the dome enclosure according to the direction shown in Figure 3-2, then cover the compression cover and tighten the screws. Figure 3-2 Note: The lens side of the dome body has to be kept vertical; otherwise, the dome body can’t be inserted into the dome enclosure.
-
Page 12: Installation For Ir Vari-Focal Dome
This step doesn’t have to be necessary, please install the device according to the actual product. Step 4 Adjust the dome pedestal location according to the clients’ requirement of top outlet or side outlet, pull out the cable from the side cable slot between installation surface and pedestal (please skip this step if it is top outlet), aim the screw fixing holes on the pedestal at the expansion bolt fixing holes on the installation surface, then tighten the three self-tapping screws into the expansion bolts and fix them firmly, fix the pedestal on the installation surface. - Page 13 Figure 3-4 Step 1 Take out the installation position map from the accessories bag, stick it on the ceiling or wall according to the outlet location, dig holes according to the marks on the installation position map, take out the expansion bolts from the accessories bag and insert the expansion bolts into the installation holes and secure them firmly.
- Page 14 surface (please skip this step if it is side outlet), then rotate the decoration ring and fix the enclosure and the dome body on the pedestal. If it is motorized vari-focal dome, then aim the enclosure and dome body at the pedestal ...
-
Page 15: Menu
4 Menu 4.1 HDCVI Series DVR Settings This HDCVI camera series can adjust OSD menu via coaxial control. After connected the camera to the HDCVI series DVR, from Main Menu->Setting->System->PTZ, you need to select the channel number for access and set control mode as HDCVI and the protocol as DH- SD1. - Page 16 Figure 4-3 See Sheet 4-1 for the details of button functions. Button Function Open menu or confirm Open menu Select menu item 、 Select menu value 、 Adjust lens zoom and auto trigger focus Note: Adjust lens focus Some of the buttons can only be applied for the motorized Auto focus under current vari-focal camera.
- Page 17 Figure 4-4 If there is “ ”, click iris “+” or the “Confirm” button in “Menu Operation” interface to go to the 2nd menu. Click “Return” button to go back to the previous menu interface. Note: The operation interface above is the example of HCVRHG-AF series, different rear-end devices have different operation interfaces;...
-
Page 18: Appendix Ⅰ Maintenance
Appendix Ⅰ Maintenance Attention: Please maintain the device according to the following instructions in order to ensure the image effect and long-term stable operation of the device. Maintenance for lens and mirror surface The lens and mirror surface are covered with antireflection coating, so it may produce hazardous substance and lead to performance reduction or scratch, dimness etc when it is stained with dust, grease, fingerprint and so on, please refer to the following methods to deal with once dirt is found:... - Page 19 Note This manual is for reference only. Slight difference may be found in the user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners.