Chapter 2 Opearting Instruction - Philips BDL46xxE Service Manual

OPEARTING INSTRUCTIONS
Index of this chapter:
1. Front-panel controls
2. OSD menu
1. Front-panel controls
All keys are located at the right edge of the display bezel.
EXET
The following front panel controls are available for this product.
EXIT: Located at the right edge of the display that serves as a dual function switch. It is used to exit
the menu if the OSD is on. When the OSD is off, it functions as an Aspect Ratio Control.
/ : Navigate through OSD depending on mode.
CHANNEL
VOLUME +/-: Change Volume or navigate through OSD depending on mode.
INPUT: Select input from PC, HDMI, component, composite.
MUTE: Switch audio on/off.
: It is a soft power switch and not a main disconnection device. Main disconnection shall
POWER
be accomplished by physically removing the power cord from the display.
Function
Enter Factory Mode
Enter Factory Reset
Lock Front button
Reload Color Temperature
Status
AC Power Off
Standby Mode
On Mode
Power saving (when no OSD) ON
Schedule Standby
Fan defect mode
Factory mode
* Note: Panel performance characteristics " MUST BE" met in all display modes/inputs at standard test
conditions.
Combination Key
v
v
v
LED Control
LED Red
OFF
ON
OFF
ON
Blinking(500mSec)
OFF
INPUT MUTE
- +
v
v
v
v v
LED Green
OFF
OFF
ON
ON
Blinking(500mSec)
Depends on SET condition
ON
Philips BDL46xxE
CHAPTER 2
MUTE
v
11