Installation Instructions; Models Covered By Instruction; Ethernet Connection; How To Do A "Factory Reset - Philips 10BDL4551T Installation Manual

2 INSTALLATION INSTRUCTIONS

2.1 Models covered by instruction

10BDL4551T

2.2 Ethernet connection

Use the LAN port to connect the screen to your network.

2.3 How to do a "Factory Reset"

Note: If the TV has not been set up before, the TV will power on in the" Install menu",
shown below. The factory reset can then be skipped.
Enter the Android menu. "Stop key, then Volume down key. Pincode 1-2-3-4
•
Enter Settings – Signage Display – System Tools – Factory Reset – select
•
Factory reset and then OK.
The screen will now reset to factory settings.
•
R&D 2021-05-11 Page 3 of 7