Philips BDL46xxE Service Manual page 8

2.4 9-pin RS-232C connector
PIN Signal
1
NC
2
RXD
3
TXD
4
NC
5
GND
6
NC
7
RTS
8
CTS
9
NC
3. Connection
AUDIO IN 1, 2, 3
To input audio signal from external equipment such as a computer VCR or DVD player.
AUDIO OUT
To output the audio signal from the AUDIO IN 1, 2 and 3 jack.
EXTERNAL CONTROL (mini D-sub 9 pin)
Connect the IN connector with the RS-232C OUT connector of the computer or a multi-connected
BDL46xxE monitor. Connect the OUT connector with the RS-232C IN connector of BDL46xxE
monitor.
VIDEO IN/OUT
VIDEO IN connector(BNC and RCA): To input a composite video signal. BNC and RCA are not
available at the same time.(Use only one input).
VIDEO OUT connector(BNC): To output the composite video signal from VIDEO IN connector.
S-VIDEO IN connector(Mini din 4 pin): To input the S-video (Y/C separate signal).
EXTERNAL SPEAKER TERMINAL
To output the audio signal from external speakers from AUDIO 1, 2, 3 jack or HDMI.
AC IN connector
Connectors with the supplied power cord.
RGB 1 IN(HDMI 1)
To input digital RGB signals from a computer.
* This connector does not supports analog input. AUDIO is supported via HDMI.
RGB 2 IN(HDMI 2)
To input digital RGB signals from computer.
* This connector does not support analog input. AUDIO is supported via HDMI.
RGB 3 IN(mini D-sub 15 pin)
To input a analog RGB signals from a computer or other RGB equipment.
RGB OUT (mini D-sub 15 pin)
To output the signal from RGB 3 N or 4 IN.
DVD/HD IN(Y, Pb/Cb, Pr/Cr)(BNC)
Connecting equipment such as a DVD player, HDTV device, or laser disc player.
Philips BDL46xxE 7