Pro SCIO 3.3 Manual page 13

INSTALLING THE CYCLOCOMPUTER ON YOUR BIKE
INSTALLING THE WIRELESS FORK TRANSMITTER
(CONTINUED)
Adjust the position of the sensor and magnet so they are in
3.
proper alignment as shown. The magnet should pass by the
sensor adjacent to the molded plastic line at a distance of
1-3mm.
Once everything is in alignment, fully tighten the spoke
4.
magnet in place and tighten the zip-ties holding the sensor to
the fork.
continued next page
o33_35_41_eng.indd 13
13
11/21/07 12:25:38 P