Operation; Setting The Clock - AT&T 1715 Installation And Operation Manual

O P E R A T I O N
Use with other buttons to
change settings
Turn system on or off
Delete all or
selected messages
Microphone
Play messages
Repeat all or part
of a message

Setting the Clock

You'll need to set the clock so that it can record
the day and time that each message is received.
1 Press and release g. The Message
Window displays CH.
2 Press and release C. The current day
setting is announced.
3 To change the day setting, hold down
/ or ? until the correct
day is announced. Then release the
button.
4 Press and release C. The current
hour setting is announced.
Record and hear outgoing
announcement
Displays number
of messages,
other indicators
Adjust volume
Stop message
playback
To check the clock, press and release C.
Set and hear time/day
Leave a message
Select number
of times line
rings before
system answers
Set and hear Remote
Access and Priority
Calling Codes
Skip all or part
of a message
5 To change the hour setting, hold down
/ or ? until the correct
hour is announced. Then release the
button.
6 Press and release C. The current
minutes setting is announced.
7 To change the minutes setting, hold
down / or ? until the
correct minutes setting is announced.
Then release the button.
8 Press and release C. The new day
and time are announced.