Russell Hobbs 20200-56 Instructions And Warranty page 9

THE PULSE BUTTON
Use the pulse button to over-ride the speed control and give a burst of extra high speed
beating, regardless of the speed set on the speed control. Simply press and hold the
pulse button down. To avoid overheating, do not use the pulse function for more than 30
seconds at a time, and let it rest for a minute or so between pulses.
REMOVING THE BEATERS AND DOUGH HOOKS
To eject the beaters/dough hooks, move the speed selector dial to "0" (OFF), unplug the
mixer, then shake off any excess food which is attached to the beaters or dough hooks
into the mixing bowl. Put the hand mixer and hold both beaters/dough hooks, over the
mixing bowl. Hold both beaters/ dough hooks to prevent them from jumping out, and
press the eject button (located at the front of the handle).
SUGGESTIONS FOR USE

Move the beaters/dough hooks gently around the mixture to ensure uniform
results.

If you want to clean the sides and base of the utensil/container with a hand-held
utensil, first switch the machine OFF.

To avoid unnecessary splashing, immerse the beater/dough hooks into the
mixture before switching the appliance ON.

Unplug the appliance when not in use, before fitting or removing the
beaters/dough hooks and before cleaning it.

Avoid coming into contact with moving parts. Keep hands, hair, clothes, as well
as spatulas and other utensils away during operation to prevent injury and/or
damage to the appliance.

The speed can be adjusted at any time. Starting from "0" (OFF), and then
adjusting the speed to the food type being mixed. For thicker mixtures, a low
speed is recommended. For fine consistency, use the high-speed settings.
9