Before First Use - Russell Hobbs 20200-56 Instructions And Warranty

CAUTION: Always check the hand mixer is switched OFF and not connected to the
mains power supply, when changing or touching the beaters or dough hooks.

BEFORE FIRST USE

Take the hand mixer out of the box and take off any protective wrappings
REMEMBER: DO NOT LEAVE PROTECTIVE PACKAGING LYING AROUND, AS IT
COULD BE DANGEROUS AROUND INFANTS. Wash the beaters and hooks under
warm soapy water, rinse well and dry. Wipe the body with a slightly dampened cloth.
DO NOT allow any liquid to touch the motor body.
OPERATING INSTRUCTIONS
FITTING THE BEATERS & DOUGH HOOKS
Remove the plug from the power outlet. Set the speed switch to "0". Insert the beaters or
dough hooks, left side first, one at a time into the slots on the bottom of the mixer. Push
and twist simultaneously until the beater or dough hook "clicks" into place. Insert the left
side first, this is the one which has a "lip" at the end of it.
NOTE: Never use beaters and dough hooks together.
USING YOUR HAND MIXER
The hand mixer is perfectly suited for preparing dips, sauces, whipping cream, cake
mixtures and the like:

Ensure the hand mixer is unplugged and the speed control is set to "0".

Put the ingredients into a durable, deep enough, mixing bowl, which is sufficiently
tall and wide to avoid splashing.

Plug the unit into the mains power supply, with the speed control set to "0".

Dip the beaters or dough hooks into the mixture as deep as possible so as to
avoid splashing.
7