Weinmann prisma20C Instructions For Use Manual page 45

• Select daylight saving time
Click on the symbol with the gray background to select it.
The background turns green when the setting is activated.
• Use the arrow keys on the right to set the minutes.
• Select the clock version: 24 h (0-24) or 12 h (0-12)
5. Confirm the set time with the
Result The therapy device is switched on and configured.
The set language and time settings are saved.
The therapy device is in the Standby mode
Standby mode (Start screen)",
If you have received an SD card from your authorized dealer with
the configuration, please insert the SD card in the therapy device
(see "5.11.1 Inserting the SD card",
The settings are then automatically transferred to the therapy
device.
5.2.2 Switching the therapy device on each time
The therapy device can assume 3 different modes:
• Standby mode (no therapy in progress)
• Therapy mode (therapy in progress)
• Energy saving mode (display is off to save energy during the
day)
1. To switch the therapy device to Standby mode, connect up
the power supply
supply",
2. If the display remains off, the therapy device is in Energy
saving mode: Press the on/off button
Result The therapy device is in the Standby mode
Standby mode (Start screen)",
After being switched on, the device displays the patient-related
operating hours for 30 seconds.
page 18).
(see "4.2.1 Connecting up the power
page 30).
page 18).
5 Operation
or standard time
button.
(see "3.2.1 Display in
page 58).
.
(see "3.2.1 Display in
WM 100 TD EN
.
45