Weinmann prisma20C Instructions For Use Manual page 32

4 Preparation
Result
4.2.2 Connecting up the respiration hose
32 EN WM 100 TD
3. Plug the free end of the power supply cable in the power
socket.
The power supply unit adjusts to the line voltage (110 V or
240 V) automatically.
The LED on the power supply unit lights up green.
The power supply is connected.
The therapy device is switched on and in Standby mode.
If you want to disconnect the therapy device from the power
supply, press the clip on the connector and pull the connector out.
Do not pull on the power supply cable.
Risk of injury due to contaminated or infected patient hose
system!
A patient hose system contaminated or infected due to lack of or
incorrectly performed hygienic preparation procedures can pass
contamination or infection on to the next patient and cause
injuries.
 Do not reprepare disposable hose systems.
 Use a bacteria filter
 Hygienically prepare reusable hose systems correctly
Hygienic preparation of the respiration hose",
1. Connect the respiration hose to the device outlet.
(see "7.4
page 69).