Resetting The Coding To The As Delivered Condition - Viessmann VITODENs 200 Installation Instructions Manual

Coding
Code 2
(cont.)
Coding in Function mode
the as
delivered
condition
Address:
value

Resetting the coding to the as delivered condition

1. Press L and G simultaneously
for approx. 2 seconds.
*5
Only for constant temperature control units.
62
Coding Possible change
change
Address:
value
utes respectively.
5
F7:25 * Internal circulation
pump is permanently ON
in "Standby mode"
2. Press e.
"Basic setting? Yes" with d.
With a or b, you can select
"Basic setting? Yes" or "Basic set-
ting? No".