Coding
Code 2
(cont.)
Coding in
Function mode
the as
delivered
condition
Address:
value
Resetting the coding to the delivered condition
1. Press L and G simultaneously
for approx. 2 seconds.
*5
Only for constant temperature control units.
62
Coding
Possible change
change
Address:
value
F7:24
will be started 1 to 24
times per day for
10 minutes respectively
F7:25
*
5
In "Standby mode", the
internal circulation pump
is permanently ON
2. Press e.
Confirm "Basic setting? Yes"
with d.
With a or b, you can select
"Basic setting? Yes" or "Basic set-
ting? No".