Table of Contents
Advertisement
Connecting TV
Cable System or VHF/UHF Antenna System
You can enjoy standard-definition and high-definition digital programming (if available in your area), along with standard-definition analog
programming.
This TV is capable of receiving unscrambled digital programming for both cable and external VHF/UHF antenna.
It is strongly recommended that you connect the antenna/cable input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm
twin lead cable can be easily affected by radio frequency interference, resulting in signal degradation.
Cable or VHF/UHF(or VHF only)
75-ohm coaxial
cable
TUNER
TUNER
High Definition Interface
You can enjoy high-definition programming by subscribing to a high-definition cable service or a high-definition satellite service. For the best
possible picture, make sure you connect this equipment to your TV via the HDMI or component video (with audio) input on the back of your TV.
HDMI Connection
HDMI IN
HDMI
HD Multimedia Interface
HDMI
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with DVI-to-HDMI cable or adapter) jack and connect
the audio jack to the PC AUDIO IN jacks.
Component Signal Connection
Component IN
Y Pb Pr
Component Video Input
Y/VIDEO
Pb
Pr
L
R
rear of TV
VHF/UHF input
HDMI
HDMI
Y
Pb
Pr
L
R
L
R
Y/VIDEO
Pb
Pr
13
TUNER
Y
Pb
Pr
L
R
Audio
L
R
Y/VIDEO
Pb
Pr
Hide quick links:
Advertisement
Table of Contents
