Sony STR-DH710 Operating Instructions Manual page 75

Menu Parameters
[Display] [Display]
HDMI Control for HDMI
[HDMI] [CTRL.HDMI]
(page 82)
HDMI Signal Pass Through
[PASS.THRU]
Setting HDMI audio input
[AUDIO.OUT]
Subwoofer level for HDMI
[SW LEVEL]
Subwoofer Low Pass Filter for
HDMI
[SW L.P.F.]
Audio Return Channel
[ARC]
SYSTEM Brightness of the display
[SYSTEM] [DIMMER]
(page 83)
Sleep timer mode
[SLEEP]
Auto standby mode
[AUTO.STBY]
Naming inputs
[NAME IN]
S-AIR S-AIR ID
[S-AIR] [ID SETUP]
(page 83)
Pairing
[PAIRING]
S-AIR mode
[MODE]
RF Change
[RF SETUP]
S-AIR Standby
[STANDBY]
a)
Depends on the speaker pattern setting, some parameters may not be available.
b)
xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW).
c)
You can only select this parameter if "PATTERN" is not set to a setting with surround back speakers or front
high speakers (page 77).
d)
"METER" for models of area code AU1, SA2 and TW2.
e)
You cannot select this setting if your speaker is set to "LARGE".
f)
This parameter is only available when HDMI input signals is detected.
g)
This parameter is only available if the S-AIR transmitter (not supplied) is inserted to the EZW-T100 slot on
the receiver.
f)
f)
g)
g)
g)
g)
g)
Settings
CTRL ON, CTRL OFF
ON, AUTO, OFF
TV+AMP, AMP
SW AUTO, SW +10 dB, SW 0 dB
L.P.F. ON, L.P.F. OFF
ARC ON, ARC OFF
DIM MAX, DIM MID, DIM OFF
OFF, 0-30-00, 1-00-00, 1-30-00,
2-00-00
STBY ON, STBY OFF
For details, see "Naming inputs"
(page 43).
ID: A, ID: B, ID: C
START, STATUS
PARTY, SEPARATE
RF AUTO, RF ON, RF OFF
STBY ON, STBY OFF
Initial
setting
CTRL ON
OFF
AMP
SW AUTO
L.P.F. ON
ARC ON
DIM OFF
OFF
STBY ON
ID: A
START
PARTY
RF AUTO
STBY OFF
75 GB