Sony STR-DH710 Operating Instructions Manual page 20

a)
Notes on the SPEAKERS SURROUND BACK/
FRONT HIGH/BI-AMP/FRONT B terminals
connection.
– If you connect only one surround back speaker,
connect it to the L of this terminals.
– If you are not using surround back speaker or
front high speakers, and you have an additional
front speaker system, connect the additional
front speaker system to this terminals.
Set "SB ASGN" to "SPK B" in the SPEAKER
menu (page 79).
You can select the front speaker system you
want to use with the SPEAKERS button on the
receiver (page 33).
– If you are not using surround back speaker or
front high speakers, you can connect the front
speakers to this terminals using bi-amplifier
connection (page 20).
b)
When you connect a subwoofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a
subwoofer, then sound may not be output.
Notes
• Before connecting the AC power cord (mains
lead), make sure that metalic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
• After you have install and connect your speaker, be
sure to select the speaker pattern from SPEAKER
menu (page 77).
20
GB
Bi-amplifier connection
If you are not using surround back speakers or
front high speakers, you can connect the front
speakers to the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals using a bi-amplifier connection.
Front speaker
(Right)
Hi
EZW-T100 ANTENNA
AM
Lo
IN 3 IN 2 IN 1 MONITOR DC5V
OUT 0.7A MAX
IN
Y
OPTICAL OPTICAL
DMPORT TV
P /
B
C B VIDEO VIDEO VIDEO VIDEO VIDEO
IN IN OUT IN OUT
P R /
C
R
COMPONENT VIDEO MONITOR
AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO
ASSIGNABLE (INPUT ONLY) OUT IN IN IN IN OUT IN
L
AUDIO
OUT
R
SA-CD/CD/CD-R TV SAT/CATV BD VIDEO 1 SUBWOOFER
SURROUND BACK/
CENTER
FRONT HIGH/
BI-AMP/
FRONT B
R L
SPEAKERS
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/FRONT
HIGH/BI-AMP/FRONT B terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
After you have made the bi-amplifier
connection, set "SB ASGN" to "BI-AMP" in
the SPEAKER menu (page 70).
Front speaker
(Left)
HDMI ASSIGNABLE (INPUT ONLY)
IN 3 IN 2 IN 1 TV OUT
ARC
SAT/ DVD
CATV IN
IN
COAXIAL
DIGITAL (ASSIGNABLE)
SURROUND BACK/
CENTER SURROUND FRONT A
FRONT HIGH/
BI-AMP/ L
FRONT B
R L R L
R
SPEAKERS
SURROUND FRONT A
L
R L
R
Hi
Lo