Sony STR-DH710 Operating Instructions Manual page 63

To perform pairing
1
Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.
2
Match the IDs of the S-AIR main
unit and the S-AIR sub unit.
• To set the ID of the S-AIR main unit,
see "To set the ID of the S-AIR main
unit" (page 61).
• To set the ID of the S-AIR sub unit,
refer to the operating instructions
supplied with the S-AIR sub unit.
3
Press AMP MENU.
4
Press V/v repeatedly to select
"S-AIR", then press
5
Press V/v repeatedly to select
"PAIRING", then press
6
Press V/v repeatedly to select
the setting you want, then
press .
• START: The S-AIR main unit starts
pairing. "SEARCH" flashes on the
display.
• STATUS: You can check the current
ID. When the pairing setting is not
made, "NO PAIR" appears on the
display.
7
Start pairing of the S-AIR sub
unit.
x For the surround amplifier
Refer to the operating instructions
supplied with the surround amplifier.
x For the S-AIR receiver
Refer to the operating instructions
supplied with the S-AIR receiver.
8
Pairing completed.
"COMPLETE" appears on the display.
To exit the menu
Press AMP MENU.
Note
Perform the pairing within several minutes after step
6. Otherwise, the pairing is canceled automatically
and "ERROR" appears on the display.
To cancel pairing
Reset the ID of the S-AIR main unit.
For details, see "To set the ID of the S-AIR
main unit" (page 61). You can select the same
ID as before.
or b.
or b.
63 GB