Toast/Cancel Button - Sage Smart Toast BTA825UK Instruction Booklet

OPERATING YOUR NEW APPLIANCE
Approximately 10 seconds before the
6.
end of the selected browning setting,
the A QUICK LOOK™ button will
cease illumination. As the toasting
stops and the carriage rises, the
TOAST/CANCEL button surround
will flash and the LED toasting
progress indicator will cease flashing.
The LED toasting progress indicator
will re-illuminate to the previously
selected browning setting.
Once the toasting cycle has completed
7.
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the toast. The
TOAST/CANCEL button surround
will re-illuminate in white for up to 30
seconds, ready for the next toasting
cycle.
NOTE
The toaster will revert to stand-by
mode after 30 seconds if a button
is NOT pressed or the slide is not
adjusted. All button surrounds and LED
toasting progress indicator will cease
illumination.
NOTE
The toaster will re-activate from
stand-by mode and the TOAST
CANCEL button surround and LED
toasting progress indicator will
illuminate when:
• Any of these buttons are pressed
(except the TOAST/CANCEL
button which will start the
toasting process).
• The browning control slide
is moved.
• The power at the power outlet is
turned off then on again.
10
WARNING
Do not leave the toaster unattended
when in use as toast may jam. In the
unlikely event that bread, crumpet,
bagels or muffins become jammed in
the toasting slots, all the button buttons
and the LED toasting progress indicator
will flash and the elements will turn
off. Switch the toaster off at the power
outlet, remove the power plug and allow
the toaster to cool completely before
carefully easing the bread out of slots.
Take care not to damage the elements.

TOAST/CANCEL BUTTON

The TOAST/CANCEL button surround will
illuminate in white for up to 30 seconds when
the appliance is turned on. The toaster will
revert to stand-by mode after 30 seconds if a
button is not pressed or the browning control
slide is not adjusted.
• Press the TOAST/CANCEL button once
to lower the carriage and start the toasting
process. The TOAST/CANCEL button
surround will then illuminate in red.
• Press the TOAST/CANCEL button during
operation to cancel the toasting process or
any other functions. The TOAST/CANCEL
button illumination will change from red
to white and stay illuminated for up to 30
seconds.
NOTE
Toasting can be stopped at any time
by pressing the TOAST/CANCEL
button located on the top of the toaster.
This will cancel the operation and the
carriage will move to the raised position.
OPERATING YOUR NEW APPLIANCE
NOTE
The toaster features a A QUICK LOOK
™
button. This automatically raises the
carriage without cancelling or resetting
the selected browning setting. Use the A
QUICK LOOK ™ button to view browning
progress during the toasting and, if
necessary, cancel the process when the
desired toast colour is achieved.
A BIT MORE SETTING
™
This feature can be selected after or during the
toasting cycle.
To use this feature during the toasting cycle:
The A BIT MORE™ button surround will
illuminate in white when selected. The toasting
time will automatically increase but will not
illuminate more of the LED toasting progress
indicator. A BIT MORE™ function can be
cancelled by pressing the A BIT MORE™
button again and the original toasting cycle
will continue.
To use this feature after the toasting cycle
has completed:
The A BIT MORE™ button surround
1.
will illuminate in white when selected.
The carriage will automatically lower
and begin the additional toasting time.
The LED toasting progress indicator
will automatically align with the lowest
browning setting then flash and count
down for the additional browning time.
The TOAST/CANCEL button
2.
surround will also illuminate in red and
the A QUICK LOOK™ button surround
will illuminate in white allowing you to
check on the toasting progress and, if
necessary, cancel the cycle by pressing
the TOAST/CANCEL button when the
desired toast colour is achieved.
Approximately 10 seconds before the
3.
end of the additional browning, the
A QUICK LOOK™ button will cease
illumination. As the toasting stops
and the carriage rises, the TOAST/
CANCEL button surround will flash,
the LED toasting progress indicator will
cease flashing and the A BIT MORE™
button surround will cease illumination.
The LED toasting progress indicator
will re-illuminate to the previously
selected browning setting.
Once the toasting cycle has finished
4.
and the carriage has risen and locked
into the raised position, the toast ready
alert will sound. Remove the toast. The
TOAST/CANCEL button surround
will re-illuminate in white for up to 30
seconds, ready for the next toasting
cycle.
NOTE
The A BIT MORE ™ button can be used
with the TOAST, CRUMPET/FRUIT
LOAF and FROZEN functions
CRUMPET/FRUIT LOAF BUTTON
Use this feature to select between the Crumpet
/ Fruit Loaf function to automatically adjust the
toasting time.
Crumpet SETTING:
The CRUMPET setting activates additional
heat to the centre heating elements to toast
crumpet tops and lightly toast the crumpet
bases.
Toast Crumpet
Place the crumpets into the toasting
1.
slots with crumpet tops facing inwards
as per the crumpet markings on the top
cover plate above the centre elements
of the toaster.
11