Sage the Smart Toast BTA825 / BTA845 - Toaster 2 Slots 1000 Wt Manual

GETTING TO KNOW YOUR NEW APPLIANCE - 2 SLICE (BTA825)

Rating Information
220–240V ~50Hz 840–1000W

GETTING TO KNOW YOUR NEW APPLIANCE - 4 SLICE (BTA845)

1. TOAST / CANCEL button
2. A BIT MORE ™ button
3. CRUMPET / FRUIT LOAF setting
4. FROZEN button
5. Motorised 'A QUICK LOOK™' button

Rating Information
220–240V ~50Hz 1680–2000W

OPERATING YOUR NEW APPLIANCE

1. Insert the power plug into a 220 – 240V power outlet then turn the power on.
   BEFORE FIRST USE
   We suggest toasting on the maximum setting without bread. The toaster may emit a thin smoke or distinct odor on initial use. This is normal and not detrimental to the performance of the toaster.
2. Place 1 slice of bread into each of the toasting slots.
3. Select the desired browning setting by adjusting the browning control slide on the front of the toaster.
4. To start the toasting process, press the TOAST / CANCEL button.
5. The A Quick Look™ button can be pressed up until 10 seconds before the end of the toasting cycle to view the browning of the bread.
6. Once the toasting cycle has completed and the carriage has risen and locked into the raised position, the toast ready alert will sound.

Do not leave the toaster unattended when in use as toast may jam. In the unlikely event that bread, crumpet, bagels or muffins become jammed in the toasting slots, all the button buttons and the LED toasting progress indicator will flash and the elements will turn off. Switch the toaster off at the power outlet, remove the power plug and allow the toaster to cool completely before carefully easing the bread out of slots. Take care not to damage the elements.

NOTE
Toasting can be stopped at any time by pressing the TOAST / CANCEL button.

A BIT MORE^™SETTING
To use this feature during the toasting cycle:
The A BIT MORE^™ button surround will illuminate in white when selected. The toasting time will automatically increase but will not illuminate more of the LED toasting progress indicator. A BIT MORE^™ function can be cancelled by pressing the A BIT MORE^™ button again and the original toasting cycle will continue.
To use this feature after the toasting cycle has completed:
The A BIT MORE^™ button surround will illuminate in white when selected. The carriage will automatically lower and begin the additional toasting time. The LED toasting progress indicator will automatically align with the lowest browning setting then flash and count down for the additional browning time.

NOTE
The A BIT MORE ™ button can be used with the TOAST, CRUMPET / FRUIT LOAF and FROZEN functions.

CRUMPET / FRUIT LOAF BUTTON
To toast crumpets

1. Place the crumpets into the toasting slots with crumpet tops facing inwards as per the crumpet markings on the top cover plate above the centre elements of the toaster.
2. To select the CRUMPET setting, press the CRUMPET / FRUIT LOAF button once and the button will illuminate white.

To toast bagels:
The CRUMPET / FRUIT LOAF setting can also be used to toast bagels. Place the bagel centre into the toasting slots with bagel facing inwards. Start toasting with CRUMPET / FRUIT LOAF turned on.

FRUIT LOAF SETTING
To toast fruit loaf:

1. To select the FRUIT LOAF setting, press the CRUMPET / FRUIT LOAF button twice and the blue button will illuminate.
2. Press the TOAST / CANCEL button which will then light up in red.

FROZEN BUTTON
To toast frozen bread:
Press the TOAST / CANCEL button and the surround will illuminate in red then press the FROZEN button and the surround will illuminate in white. The bread will automatically lower into the toasting slots. The toasting time will automatically increase.

A QUICK LOOK^™ BUTTON
This feature automatically raises and lowers the carriage so you can check progress without interrupting and / or cancelling the toasting cycle.

CARE AND CLEANING

1. Switch the toaster off at the power outlet and then remove the power plug from the power outlet. Allow the toaster to cool completely before cleaning.
2. To clean any crumbs from the toaster, remove the crumb tray (located under the control panel at the front of the toaster) by pulling it outwards. Empty and replace the crumb tray before using the toaster again. Replace the crumb tray by sliding it inwards until it locks into position.
3. To remove any additional crumbs, turn the toaster upside down over a bin and shake crumbs free.
4. Wipe the outside of the toaster with a slightly dampened soft cloth and then dry it with a soft dry cloth to dry completely.

NOTE
Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts creating an electric shock hazard.

STORAGE
Switch toaster off at the power outlet and remove the power plug from the power outlet. Allow the toaster to cool completely before storing. Follow the directions for cleaning and store in an upright position on a flat surface on a bench top or in an accessible cupboard. Do not store anything on top of the toaster.

Do not use the toaster without the crumb tray in position. Do not allow crumbs to build up in the crumb tray. Failure to clean the crumb tray regularly may result in a fire hazard.