Sensor Control - Gaggenau AF210 Instructions For Installation And Use Manual

Sensor control

In automatic mode, a sensor in the extractor hood
detects the intensity of the cooking and roasting fumes.
Depending on the setting of the sensor, the fan
automatically switches to another fan setting.Depending
on the setting of the sensor, the fan automatically
switches to another fan setting.Depending on the
setting of the sensor, the fan automatically switches to
another fan setting.
Default sensitivity setting: 2
Lowest sensitivity setting: 1
Highest sensitivity setting: 4
If the sensor control responds too quickly or too slowly,
it can be changed accordingly:
1 When the fan is switched off, press the
and hold it for approx. 4 seconds. The setting is
displayed.
2 Press the 1, 2, 3 or
of the sensor control.
Button 1 = Sensitivity 1
Button 2 = Sensitivity 2
Button 3 = Sensitivity 3
Ž
= Sensitivity 4
but-
ton
3 To confirm the entry, press and hold the
for approx. 4 seconds.
Saturation display
When the metal grease filters are saturated, a signal
sounds for approx. 4 seconds after the fan is switched
œ
off. The saturation indicator also lights up.
▯
If you have not yet done so, the metal grease filters
should be cleaned now. For instructions on how to
clean the metal grease filters, please refer to the
section
Cleaning and maintenance
▯
While the saturation indicator is lit up, it can be
reset. To do this, press the
<
Ž
button to change the setting
<
.
œ
button.
Lighting
The lighting can be switched on and off independently
of the ventilation.
@
Press the
Setting the brightness
Press and hold the
brightness is reached.
Audible signal
Switching on the acoustic signal
When the fan is switched off, press the
same time for approx. 3 seconds. A signal sounds as an
acknowledgement.
button
Switching off the acoustic signal
Repeat the "Switching on the acoustic signal" process.
button
button.
@
button until the desired
# Ž
and at the
23