Marantz AV8802A Owner's Manual page 209

Contents Connections
o HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On:
Off
(Default):
0 Please consult the operating instructions for each connected device to check
the settings.
0 Refer to "HDMI control function" for more information about the HDMI control
function. (v p. 166)
NOTE
If the "HDMI Control" settings have been changed, always reset the power to
connected devices after the change.
Front panel Display
Playback
Use HDMI control function.
Do not use HDMI control function.
Rear panel
Settings
o Pass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last:
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CD
z
(Default : CBL/SAT):
z"Pass Through Source" can be set when any of the HDMI
connectors is assigned to "CD" for the input source in the "Input
Assign" setting. (v p. 218)
"Pass Through Source" can be set when "HDMI Control" is set to "On" or "HDMI
Pass Through" is set to "On".
209 Remote
Tips Appendix
The most recently used input source will
go into standby mode.
Pass through the selected input source.
Index