Audyssey - Marantz AV8802A Owner's Manual

Contents Connections

Audyssey

Set Audyssey MultEQ ® XT32, Audyssey Dynamic EQ
Dynamic Volume ® and Audyssey LFC™. These can be selected after
Audyssey ® Setup has been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 328).
0 "MultEQ ® XT32", "Dynamic EQ", "Reference Level Offset", "Dynamic Volume",
"Audyssey LFC™", "Containment Amount" and "Audyssey DSX
stored for each input source.
0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ
"Dynamic EQ" and "Dynamic Volume" settings cannot be configured.
0 This cannot be set when the input mode is set to "7.1CH IN".
Front panel Display
Playback Settings
o MultEQ
MultEQ
® , Audyssey
characteristics of the listening area based on Audyssey
measurement results. Selection is done from three types of
compensation curves. It is recommended that "Reference" is selected.
Reference
(Default):
L/R Bypass:
® " settings are
® XT32",
Flat:
Off :
When the headphones are used, "MultEQ
Rear panel 198
Tips
® XT32
® XT32 compensates for both time and frequency
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
Selects the reference setting, but
bypasses MultEQ
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Turn "MultEQ
Remote Index
Appendix
® Setup
XT32 on the front left
®
XT32" equalizer off.
®
® XT32" is automatically set to "Off".