Maserati QUATTROPORTE Owner's Manual page 166

Dashboard Instruments and Controls
Display
After pressing the Display soft-key the
following mode settings will be
available.
• Display mode
When in this display you can select
one of the auto display settings. To
change mode status, touch and
release the Day, Night or Auto
soft-key.
4
• Display Brightness with Headlights
On
When in this display, you can select
the brightness with the headlights
on. Adjust the brightness with the +
and – setting soft-keys or by
selecting any point on the scale
between the + and – soft-keys.
164
• Display Brightness with Headlights
Off
When in this display, you can select
the brightness with the headlights
off. Adjust the brightness as
previously explained.
• Set language
When in this display, you can select
one of available languages for all
display descriptions, including the
trip functions and the navigation
system.
• Units
When in this display, you can select
between US and Metric units of
measurement in the instrument
cluster, odometer and navigation
system. The speed unit, shown in
digital format on the TFT display of
the instrument cluster, is defined
and modifiable through the controls
located on the right side of the
steering wheel (see "TFT Display" in
chapter "Instrument Cluster" of this
section).
• Voice Response Length
When in this display, you can change
the voice response length settings.
To change the voice response
length, touch the Brief or Detailed
soft-key.
• Touchscreen Beep
When in this display, you can turn
on or shut off the sound activated
by pressure of a touch screen button
(soft-key).
• Control Screen Time-Out
Use this mode to operate the timing
of the control screen display.
• Navigation Turn-by-Turn Displayed
on Cluster
By selecting this feature, the
turn-by-turn directions will appear
on the instrument cluster along a
programmed route until the desired
destination is reached (see picture).