Maserati QUATTROPORTE Owner's Manual page 108

Understanding the Vehicle
Multifunction Lever
The multifunction lever controls the
operation of the turn signals,
headlight beam selection and
overtaking lights.
The multifunction lever is fitted on the
left side of the steering column.
3
Turn Signals
Move the multifunction lever all the
way up or down until the stop trigger;
the left or right arrow on respectively
the speedometer and Rev Counter
instrument cluster, flashes to show
proper operation of the front and rear
turn signal lights.
106
To activate lane change function, tap
the lever up or down once, without
moving beyond the detent. The turn
signals (right or left) will flash three
times then automatically turn off.
This function is useful when
overtaking or changing lanes.
NOTE:
• If either light remains on and does
not flash, or flashes at a fast rate,
check for a defective outside light
bulb. If an indicator fails while
moving the lever, then the indicator
bulb is probably defective.
• A "Turn Signal On" message will
appear in the instrument cluster and
a continuous chime will sound if the
vehicle is driven more than 1 mile
(1.6 km) with either turn signal on.
High Beams and Flashing
To switch on the high beams with the
light switch in headlamp
"AUTO" position, shift the
multifunction lever onward.
A related telltale will illuminate
on the Rev Counter.
Pulling the lever backward (toward the
steering wheel) you switch off the
high beams and switch on the low
beams.
or