Advertisement
Available languages
Available languages
The hood can be switched on pushing directly onto the requested speed without firstly having
to select 0/1 button.
K EY
L
0/1 Light
T1
0/1 Motor on
T2
Speed
Flashing
T3
Speed
T4
Speed
S1
Led
EN
L ED
FUNCTI ONS
Turns lighting on and off.
First speed.
When pressed for about 1 sec onds the motor
is switched off.
Flashing
24h Changeover
This is enabled by pressing and holding
the button for approximately 5".It al-
lows a suction level of 100 m3/h with a
noise level of just 28dB(A).Can be en-
abled at any speed, even with the hood
turned off.To disable, press and hold
the button for approximately 5".
on
Second speed.
Delay (30')
Press the button for approximately 2" to enable auto-
matic shutdown with a 30' delay. Suitable to complete
elimination of any residual smells. Can be enabled at
any speed and is disabled by pressing the button T1
briefly.
on
Third speed.
Fixed
Max. speed
Flashing
Intensive speed.
Suitable for the strongest cooking vapours and odours.
The function becomes active when the button is
pushed for about 2 seconds. After 10 minutes of func-
tioning it turns off automatically. This function can be
interrupted by means of pressing any of the buttons.
Fixed
Indicates that the Metal grease filters saturation alarm
has been triggered, and the filters need to be washed.
The alarm is triggered after 100 working hours. (Re-
set; check the Maintenance-paragraph)
Flashing
indicates that the activated charcoal odour filter
saturation alarm has been triggered, and the filter has
to be replaced; the metal grease filters must also be
washed.
triggered after 200 working hours. (Activation and
Reset; check the Maintenance-paragraph)
The activated charcoal odour filter is
2
23
3
Advertisement
