Thrust Jet Adjustment; Sweep Hose Adjustment - Polaris 480 Pro Owner's Manual

Fine Tuning The Polaris Cleaner
When operating correctly, the Polaris 480 vacuums, sweeps and scrubs all surfaces randomly throughout the
pool. Approximately every 3 minutes the Polaris 480 goes into back-up mode. This action pulls the Polaris
away from pool obstacles and increases its random pattern.

Thrust Jet Adjustment

The thrust jet powers the direction
of the Polaris. Factory position is
straight back, but depending on
the pool, other settings are helpful.

Sweep Hose Adjustment

The sweep hose should move in a gentle
sweeping motion. To increase or decrease the
motion of the sweep hose, turn off the booster
pump and change the sweep hose settings.
There are five easy-click settings located at
the back of the cleaner.
Routine Maintenance
Cleaning the All-Purpose Filter Bag
Detach the Velcro strips. Depress the bag clasp to free the bag from the feed hose. Depress the prongs to
release the bag from the cleaner. Open the bag closure and remove the debris.
Empty the bag
when it is half full, especially if
the dirt load is sand.
It is easier to empty
the bag when it is dry.
Alternate between
two bags.
Sweep Hose Settings
Zipper
Closure
www.polarispool.com
12
9 3
6
Sweep Hose Jet
Thrust Jet