Scanner Bluetooth Operation - Prodimar MiniTIM User Manual

7 Scanner Bluetooth operation

Once the MiniTIM is associated to a remote device, the scanner Bluetooth operation is the
following:
- Activating the scanner to read barcodes in the device range.
Depending on the selected scanner mode combination, MiniTIM will activate the scanner
according to this selection (keystroke, proximity or movement detection).
If there is no barcode reading in 12 seconds, the device will stop scan in order to reduce the
battery consumption. If there is a new event after this time, the scan will be reactivated.
- Disabling the current reading.
If the user wants to stop the current reading of the device before 12 seconds time, just have
to press briefly the "X" key.
- Sending the scanned barcode to a remote device.
MiniTIM will automatically send the last read barcode to the remote device if this one keeps
being connected. If the connection with the remote device is missed during the process:
a) The right LED will stay in a permanent red color and the barcode won't be sent
until the remote device recovers the connection.
b) In this case, the user can restart the scanner Bluetooth operation with a short
press in the "X" key. No barcode will be sent until the Bluetooth connection is
restored.
9 de 14