About Keys And Leds - Prodimar MiniTIM User Manual

5 About keys and leds

- Keys:
"X" Key:
o
"V key":
o
- LEDS:
o Left Led:
o Right Led:
Long pressing: (2 seconds): MiniTIM switching on/off.
Short pressing: Cancelation of the current operation (i.e. barcode reading)
and getting back to the previous state.
Long pressing (2 seconds): Activation of the scanner to introduce
configuration barcodes.
Short pressing: If the device is configured to this aim, activation of the
scanner to read barcodes.
Green blinking: MinTIM is waiting for a Bluetooth connection.
Permanently in green color: MiniTIM is connected to a remote device.
Red blinking: Low battery notification.
Permanently in orange color: MiniTIM is sending data to a remote device.
Permanently in red color: Fail to send the data due to a Bluetooth connection
failure. Once the BT connection is restored the scanned barcode is
automatically sent. The user can cancel the data sending pressing the "X"
key.
7 de 14