Scanner Bluetooth Operational Mode; Scanner Activation Modes - Prodimar MiniTIM User Manual

The keys operation in this mode is as follows:
- "X" key: exit from this mode.
- "V" key: performs a barcode reading.
Note #1: It is recommended for the user not to use the guide sections in relation with scanner hardware performance neither those in
relation with communications. It could render the device out of order.
Note #2: This mode allows configuring the scanner only with the codes provided by the device manufacturer. It has no utility for the
configuration of parameters for the MiniTIM use. These parameters must be configured during the device starting, as established in the
section "Getting started".

4.4 Scanner Bluetooth operational mode

In this mode the MiniTIM scans barcodes and sends the data via Bluetooth to any other device
with Bluetooth communications (PDA, PC, Terves32, etc...).

4.5 Scanner activation modes

MiniTIM enables the user to configure the scan activation in 3 different modes to customize it to his
needings; these modes are:
- Keystroke scan activation. In this mode the device reads barcodes when the user
shortly presses the "V" key.
- Scan activation by proximity detection. When the MiniTIM scanner detects an
obstacle, it launches the reading thanks to an incorporated object detection system. The
user only has to bring closer the MiniTIM to the object with the barcode and it will
execute the reading without having to press any key.
- Scan activation by movement detection. A 3D movement sensor is also incorporated
to MiniTIM. It enables the barcode reading with only a device movement.
These 3 ways of scanner activation can be combined among them at any time.
6 de 14