P-Tronic 100 Gouging - P-Tronic 40P Instruction Manual

Instruction Manual
WARNING: the generator is equipped with a TER PT-100 plasma torch, cod
Z0042AA 6 mt long. This torch has to be considered as integral part of the
generator and its functioning and safety are guaranteed only with the origi-
nal torch. For any spare parts refer to the appendix list.
The torch is equipped with a safety circuit which prevents any accidental
contacts with conductive elements: the generator does not work if the safety
circuit is activated.
Switch always the machine OFF when working on the torch.
GB
The generator can work in three different modes:
11. STANDARD STAND OFF – GRATING – GOUGING
SOLID CUT
P-Tronic 100
GOUGING APPLICATION
GRATING CUT
P-Tronic 40P - 70 - 100
- 10 -