3D Menu - AOC LE50D7840 User Manual

Sharpness
Noise reduction
MPEG artifact reduction
Press to access the menu <Clear picture>. Make setting adjustments in this phase to fine-tune the pixel quality of
image.
Advanced sharpness
Dynamic contrast
Clear picture
Dynamic backlight
Color enhancement
Press to access advanced settings such as Gamma, Color temp, Custom color temp, Video contrast, Brightness and
Tint.
Gamma
Color temp
Advanced
Custom color temp
Video contrast/3D video
contrast
Brightness
Tint
Game and computer
Press to access <Format and edges> to control the display format of the image.
Picture format
Format and edges
Screen edges
Picture shift

3D MENU

Press HOME on TV remote control, then select Setup > TV settings > 3D. Press the middle button OK to access the sub-menus.
To cycle through these sub-menus, use the navigation ring on TV remote control.
Set the corresponding 3D mode. Select your preferred 3D mode from one of the following options: 2D, 2D to 3D
3D settings
conversion, 3D - Side by side, 3D - Top / bottom, 3D - Side by side inverted, 3D - Top / bottom inverted.
3D effect Enable the 3D effect function.
Switch to 3D Select your preferred 3D switch from one of the following options: Never, Notification only, Automatic.
Adjust the image sharpness. The sharpness adjustment range is from 0 ~ 10.
Filter and reduce noise in the video. Select your preferred reduction level from one of the
following options: Off, Minimum, Medium, Maximum.
Smoothen transitions and blurriness in the digital image.
Enable excellent image clarity.
Dynamically improve the details in various tonal areas of the image.
Dynamically adjust brightness of the TV backlight to match lighting conditions. Select your
preferred backlight level from one of the following options: Off, Standard, Best Power,
Best Picture.
Make colors more lucid and rich. Select your preferred color enhancement level from one
of the following options: Off, Minimum, Medium, Maximum.
Adjust the non-linear setting for picture luminance and contrast.
Adjust the color tone of video. Select a predefined color temperatures from one of the
following options: Normal, Warm, Cool, Custom.
Only available when Color temp > Custom is selected.
Adjust the video contrast by intensify the tonal difference between bright and dark areas.
Adjust the brightness of the video. The adjustment range is from 0 ~ 100.
Adjust the color saturation of the image. The adjustment range is from 0 ~ 100.
When viewing content from a connected game console, select Game to apply game
settings. When a computer is connected through HDMI, select Computer. Make sure that
Format and edges > Picture format > Unscaled is selected to view maximum detail.
Only available in HDMI/AV/CVI source.
Change the image format to match video source. Select your preferred picture format
from one of the following options: Auto fill, Auto zoom, Superzoom, Movie expand
16:9, Wide screen, Unscaled, 16:9 stretch, 4:3.
Adjust the image size.
Adjust the position of the image if available.
19