avertX HD310IR Spectrum Vision Quick Start Manual

HD310IR QUICK START GUIDE

About this Guide

This guide is a quick reference that offers users basic information regarding
installation and operation of the HD310IR Spectrum Vision™ WDR Indoor / Outdoor
High Definition IP Cameras. For further details on installation and operation, please
refer to the User Manual on the included CD and at avertx.com.
CONTENTS
Before proceeding, please confirm that the box contains the items listed here. If any
item is missing or has defects, DO NOT install or operate the product and contact
AvertX for assistance.
HD310IR
Torx Tool
Dome Camera
Paintable Dome Cover
The dome cover for the HD310IR is paintable, allowing for a
customizable look. Use a paint designed for plastic and paint away
from the camera dome to avoid overspray. To install, firmly press
the cover onto the camera.
Paintable
Dome Cover
Documents &
Screws Anchors
Installation CD
SPECTRUM VISION
INDOOR/OUTDOOR
HD IP DO ME CA MERA
WITH NIGHT VISION
INSTALLATION
Remove Dome Cover
Align Holes on Wall
Adjust Aim
WDR
™
The camera can be installed directly onto a
wall or the ceiling. Be sure that the structure
is strong enough to support the camera.
1. Remove the camera dome cover.
2. Use the included mounting template to
pre-drill holes for the mounting screws
and, if passing the cable through the
ceiling or wall, drill a 3/4" hole.
3. Connect the Ethernet cable to the dongle
on the camera.
• Protect the network cable connection
from water damage by running the cord
inside a wall or ceiling, or through conduit.
• For outdoor installations, seal any
holes in the wall or ceiling with silicone
caulk to protect against water intrusion.
4. Affix the base of the camera to the wall
with the included self-tapping screws and
wall anchors.
5. Adjust the position of your camera.
6. Replace the dome cover.
Wall mount and electrical box mounting plate
accessories are available at avertx.com.
32863AA