The Loading Door Cannot Be Opened With The Door Button - Miele NOVOTRONIC W 1612 Operating Instructions Manual

Troubleshooting

The loading door cannot be opened with the Door button

Possible cause
The washer is not
connected and/or switched
on.
The safety lock has been
activated.
The pin code feature is
active.
Power failure
The door was not properly
closed.
There is still water in the
drum and the washer
cannot drain.
To prevent scalding, the door will not open if the suds temperature is higher than
55°C.
38
Insert the three-pin plug into the socket and/or
switch the washer on using the I-On/0-Off button.
Switch off the childproofing as described in the
section on "Changing a program sequence" under
"Safety lock".
Switch off the pin code as described in the section
on "Programmable functions" under "Pin code".
Open the loading door as described in the next
section.
Firmly press the latch side of the loading door,
then press the Door button.
Clean the drain filter and pump, as described in
the next section.
Remedy