Energy-Saving; About This User's Manual - NEC P502HL User Manual

Energy-saving

• 0.15 W (100-130 V AC)/0.36 W (200-240 V AC) in standby condition with energy saving technology
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode.
NORMAL: 0.15 W (100-130 V AC)/0.36 W (200-240 V AC)
NETWORK STANDBY: 2.1 W (100-130 V AC)/2.3 W (200-240 V AC)
• "ECO MODE" for low power consumption and "CARBON METER" display
The projector is equipped with a "LIGHT MODE" for reducing power consumption during use. Furthermore, the
power-saving effect when the [ECO MODE] is set is converted into the amount of reductions of CO
and this is indicated on the confirmation message displayed when the power is turned off and at [INFO.] on the
on-screen menu (CARBON METER).

About this user's manual

The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to
review the user's manual. This may save you time later on. At the beginning of each section of the manual you'll find
an overview. If the section doesn't apply, you can skip it.
3
1. Introduction
emissions
2